TruFlat Laser Wood
In Stock
Spend $149 or more and receive $20 cashback.
Couldn't load pickup availability
Product Details
Product Details
TruFlat Laser Wood – Guaranteed Flat, Pre-Finished Engineered Wood
TruFlat is an engineered wood sheet built to solve the one thing that ruins most laser wood projects: warping. Every sheet has a 100% wood-fibre MDF core with a designer wood-look (or solid colour) face pressed onto both sides, so you get a smooth, pre-finished surface that's ready to cut and engrave straight out of the pack. No masking, no sanding, no guesswork.
Pixel Burn is the only authorised TruFlat reseller in Australia, carrying the full colour range so you can test a finish or restock your production line with confidence.
Why You'll Like Working With It
- Guaranteed flat — no bowing or warping on the laser bed
- Pre-finished on both sides, so there's no "wrong side" to worry about
- Cuts cleanly on CO2 and diode lasers
- Wipes clean after engraving — no masking required
- Paint fills wipe off the surface easily while staying in the engraved detail
- Sublimation-ready on Maple, Oak, Linen and White (Paint Primed is not sublimatable)
Sheet Size & Specifications
| Spec | Detail |
|---|---|
| Sheet size | 305 x 483mm (12 x 19in) |
| Thickness | 3mm (1/8in) approx. |
| Core | 100% wood-fibre MDF, engineered for laser cutting |
| Finish | Pre-finished designer face on both sides |
| Sublimation | Yes (Maple, Oak, Linen, White) — Paint Primed is not sublimatable |
Is TruFlat Actually Plywood?
Not in the traditional sense. TruFlat uses an engineered wood-look face bonded to a defect-free MDF core, rather than stacked wood plies like a Baltic birch sheet. That's exactly why it stays flatter and cuts more predictably than natural plywood, which can vary sheet to sheet and warp over time. If you're after visible layered edges like traditional plywood, this material will look different — but if you want consistent, flat, laser-ready sheets every time, this is built for exactly that.
What You Can Make With It
- Signs and wall décor
- Engraved ornaments and gift tags
- Coasters and keychains
- Table numbers and place cards
- Layered artwork and shadow boxes
- Business cards and POS displays
- Sublimated photo gifts (Maple, Oak, Linen, White)
Laser Settings
These are starting points only — always run a test cut on scrap before a full production run, since results vary by machine, lens condition, focus height and calibration.
| Machine | Operation | Power | Speed | Resolution | Passes |
|---|---|---|---|---|---|
| Glowforge Plus (40W) | Engrave | 30–50 | 80–150 mm/s | 300–600 DPI | – |
| Glowforge Plus (40W) | Cut | 80–100 | 10–15 mm/s | – | – |
| Glowforge Pro (45W) | Engrave | 25–45 | 100–200 mm/s | 300–600 DPI | – |
| Glowforge Pro (45W) | Cut | 70–90 | 12–18 mm/s | – | – |
| OMTech (80W) | Engrave | 20–40 | 100–200 mm/s | 300–600 DPI | – |
| OMTech (80W) | Cut | 50–70 | 15–20 mm/s | – | – |
| OMTech Pro (130W) | Engrave | 15–35 | 150–250 mm/s | 300–600 DPI | – |
| OMTech Pro (130W) | Cut | 40–60 | 20–30 mm/s | – | – |
| Thunder Bolt (30W) | Engrave | 50 | 500 mm/s | – | – |
| Thunder Bolt (30W) | Cut | 75–80 | 10–12 mm/s | – | – |
| Thunder Bolt Plus (40W) | Engrave | 20–40 | 200–400 mm/s | 300–600 DPI | – |
| Thunder Bolt Plus (40W) | Cut | 90 | 3 mm/s | – | – |
| Thunder Nova Plus (60W) | Engrave | 20–40 | 200–400 mm/s | 300–600 DPI | – |
| Thunder Nova Plus (60W) | Cut | 60–80 | 15–25 mm/s | – | – |
| WeCreat Vision (40W) | Cut | 80 | 12 mm/s | – | – |
| WeCreat Vista (10W) | Engrave | 100 | 200 mm/s | – | 1 |
| WeCreat Vista (10W) | Cut | 100 | 2 mm/s | – | 1 |
| xTool F1 (10W) | Engrave | 100 | 150 mm/s | 300 | – |
| xTool F1 (10W) | Cut | 70 | 8 mm/s | – | 9 |
| xTool F1 Ultra (20W) | Engrave | 70 | 300 mm/s | 200 | 1 |
| xTool F1 Ultra (20W) | Cut | 60 | 35 mm/s | – | 8 |
| xTool F2 Ultra (60W) | Engrave | 50 | 1800 mm/s | 120 | 1 |
| xTool F2 Ultra (60W) | Cut | 90 | 30 mm/s | – | 4 |
| xTool F2 Ultra (60W) | Score | 20 | 150 mm/s | – | – |
| xTool M1 (10W) | Engrave | 100 | 150 mm/s | 300 | – |
| xTool M1 (10W) | Cut | 70 | 8 mm/s | – | 9 |
| xTool M1 Ultra (20W) | Engrave | 70 | 300 mm/s | 200 | 1 |
| xTool M1 Ultra (20W) | Cut | 60 | 35 mm/s | – | 8 |
| xTool P2 (55W) | Engrave | 20 | 80 mm/s | 140 | 1 |
| xTool P2 (55W) | Cut | 100 | 18 mm/s | – | 2 |
| xTool S1 (10W) | Engrave | 100 | 150 mm/s | 300 | – |
| xTool S1 (10W) | Cut | 70 | 8 mm/s | – | 9 |
| xTool S1 (20W) | Engrave | 70 | 300 mm/s | 200 | 1 |
| xTool S1 (20W) | Cut | 60 | 35 mm/s | – | 8 |
| xTool S1 (40W) | Engrave | 40 | 300 mm/s | 200 | 1 |
| xTool S1 (40W) | Cut | 60 | 35 mm/s | – | 5 |
Cleaning Char Marks
If you get char residue along your cut edges, wipe it back with a microfibre cloth and warm soapy water, or a multi-surface cleaner. Avoid harsh chemicals or abrasives — they can dull the pre-finished surface.
Frequently Asked Questions
Is TruFlat actually plywood?
Not in the traditional sense — it's an engineered wood-fibre MDF core with a wood-look face pressed onto both sides, rather than stacked layers of real wood ply. That's what gives it the guaranteed-flat result standard plywood can't match.
What's the difference between White and Paint Primed?
White has a smooth, slightly glossy pre-finished surface built for sublimation and engraving. Paint Primed has a matte, unfinished, lightly textured surface designed to soak up paint — it's not sublimatable, but it saves you priming raw MDF yourself.
Can I sublimate on it?
Yes — Maple, Oak, Linen and White are all sublimation-ready straight out of the pack. Paint Primed is not suitable for sublimation.
Does it need masking before I cut or engrave?
No. It's pre-finished on both sides specifically so you can skip masking altogether — cut, engrave, wipe clean, done.
What can I make with it?
Signs, ornaments, coasters, keychains, table numbers, layered wall art, business cards, gift tags and sublimated photo gifts — it's a solid all-rounder for both cutting and engraving projects.
Is it beginner-friendly?
Yes. Because it's engineered for consistent, flat results sheet to sheet, it takes a lot of the trial-and-error out of laser wood work compared to natural plywood.
What size does it come in?
One size: 305 x 483mm (12 x 19in), roughly 3mm thick.
My engraving looks too light or too dark — what's going on?
Too light usually means your power is too low or speed too high — nudge power up 5–10% before touching speed. Too dark or burned usually means power's too high or you're running too many passes — ease off power slightly and increase speed while keeping detail sharp. Always test on scrap first, since results vary by machine and calibration.
Can I buy TruFlat anywhere else in Australia?
No. Pixel Burn is the only authorised TruFlat reseller in Australia. It is possible to order sheets directly from the US, but nobody else is authorised to sell TruFlat commercially within Australia.
Personalisation & Quality
Personalisation & Quality
Every Pixel Burn order is reviewed by our design team before production begins. Personalisation details are carefully checked to ensure accuracy, layout, and engraving quality.
If an art proof is requested, it will always be provided for approval before engraving. Where clarification is needed, our team will contact you before proceeding with production.
Personalisation is applied exactly as approved. Preview images are for reference only, and each engraved item is unique, with natural variations depending on the material and colour.
All products are designed, engraved, and quality-checked in Australia using dedicated laser engraving equipment.
Production, Shipping & Returns
Production, Shipping & Returns
All personalised orders are produced in-house by our team. Most orders are made same or next business day, depending on design approval and order volume.
We ship Australia-wide using trusted carriers, with tracking provided once your order is dispatched. Free standard shipping is included on most orders, with the option to upgrade to priority or overnight delivery at checkout for time-sensitive gifts.
Local pickup is available from our Brisbane City store usually ready within 24-48 hours.
Personalised orders can be cancelled anytime before design work begins. Once design or production has started, changes or cancellations may not be possible due to the custom nature of the item.
If there’s an issue with your order, we’ll remake or replace it properly.
Why Pixel Burn?
Why Pixel Burn?
Most orders placed on our site aren’t just for the buyer. They’re gifts, keepsakes, or items made for a specific moment. That’s why we pay close attention to the details, from engraving quality and material choice to packing and dispatch.
We focus on doing things properly. Clear communication, fast turnaround, and careful handling are part of how we work. Every order is produced with the understanding that it represents something personal to the person receiving it.
We know this order matters, and we treat it that way.
Your payment details are processed securely. We do not store credit card information and never have access to your card details. Personalised orders can be cancelled at any time before design work begins. A pre-authorisation is placed at checkout, but payment is not finalised until you approve your design.
